Oxygen therapy is used for medical interventions in various clinical areas to treat patients with hypoxia and hypoxemia.
Different disease patterns and different types of applications require different levels of oxygenation.1
The Unomedical Oxygen Delivery System represents a complete range of products to meet virtually any situation, where oxygen supply is required.
All of them come with special features designed to help healthcare professionals give their patients the best possible care.
The guide below illustrates the level of oxygenation which can be achieved by the different devices.
Low 24-40%
Acute & chronic use
Designed for use when precise control of FiO2 is not mandatory.
Used with flow rates of up to 6 litres/min in adult patients.2
Oxygen supplied via nasal cannula at flow rates ≤4/min does not need to be humidified.3,4
FiO2 may fluctuate greatly depending on the breathing pattern of the patient.5
Specially moulded extra-soft and flexible nasal oxygen cannulas
Fits-All™ connector for connection to an oxygen nipple/fir-tree or directly to a flow meter screw eliminating the need for adaptors.
Transparent material enables patient observation.
Sof-Touch™ nosepiece and extra-soft lariat tubing for patient comfort. Neonate/premature, infant, children, adult sizes available.
No-Crush™ tubing helps to decrease the risk of occlusion and stall.
Free of DEHP/Phthalates, Latex and Bisphenol for increased patient and environmental safety.
Medium 35-50%
Acute use
Designed for use when precise control of FiO2 is not mandatory.
Medium FiO2 is delivered at oxygen flows of 5 to 10 L/min.
Flow rates should be maintained at 5 L/min or more to avoid rebreathing exhaled CO2.2,6,7
The FiO2 may fluctuate and is influenced by the fit of the mask and breathing pattern of the patient.8
Soft and flexible masks with smooth finish for excellent seal and wearing comfort
Complete Range (click for product catalogue):
Medium Concentration Oxygen Masks FreeLine™ Medium Concentration Oxygen Masks High Flow Nasal Oxygen CannulaFits-All™ connector for connection to oxygen nipple/fir-tree or directly to flow meter screw eliminate the need for adaptors.
No-Crush™ tubing helps to decrease the risk of occlusion and stall.
Adjustable nose clip supports comfortable fit.
Transparent material enables patient observation.
Elongated under-the-chin design improves patient acceptance and compliance.
Free of DEHP/Phthalates, Latex and Bisphenol for increased patient and environmental safety.
Fixed 24-60%
Acute use
Designed for use when precise control of FiO2 is mandatory.
Fixed flow / Fixed concentration systems deliver a prescribed gas mixture.
Venturi Mask Kits deliver the assigned FiO2 irrespective of the patient’s breathing pattern but depending on the fit of the mask.
Soft and flexible masks with a set of diluters to cover all concentrations
Adjustable nose clip supports comfortable fit.
Transparent material enables patient observation.
Elongated under-the-chin design improves patient acceptance and compliance.
Aerosol hood allows for simultaneous supply of aerosolized medication/humidification.
No-Crush™ tubing helps to decrease the risk of occlusion and stall.
Clearly stated FiO2 and oxygen flow rates on each diluter for fast and easy identification.
Fits-All™ connector for connection to oxygen nipple/fir-tree or directly to flow meter screw eliminate the need for adaptors.
Free of DEHP/Phthalates, Latex and Bisphenol for increased patient and environmental safety.
High 40-80%
Acute use
Designed for use when an adequate amount of O2 is required to meet unpredictable breathing patterns.
At a flow rate of 6-10 L/min the rebreathing system can provide 40-70% oxygen and at a min. flow rate of 10 L/min the non-rebreathing system 60-80% oxygen.9
Oxygen flow should always be supplied to maintain the reservoir bag at least one third to one-half full-on inspiration.9
The FiO2 may fluctuate and is influenced by the fit of the mask and breathing pattern of the patient.10
Soft and flexible masks with smooth finish for excellent seal and wearing comfort
Complete Range
(click for product catalogue information):
High Concentration Oxygen Masks (rebreathing & non-rebreathing masks)Adjustable nose clip supports comfortable fit.
Transparent material enables patient observation.
Swiveling connection between mask and tube/bag reduces the risk of dislocation by torque.
Elongated under-the-chin design improves patient acceptance and compliance.
No-Crush™ tubing helps to decrease the risk of occlusion and stall.
Fits-All™ connector for connection to oxygen nipple/fir-tree or directly to flow meter screw eliminate the need for adaptors.
Free of DEHP/Phthalates, Latex and Bisphenol for increased patient and environmental safety.
A comprehensive range of nebulization solutions for tracheobronchial and alveolar deposition to meet the treatment requirements of patients with various respiratory conditions. All products come with special features designed to help healthcare professionals give their patients the best possible care.
*Data on file at ConvaTec
For product catalogue please click here.
*Data on file at ConvaTec
For product catalogue please click here.
*Data on file at ConvaTec
For product catalogue please click here.
Select documents to download, or click to open PDF.
For product catalogue please click here.
How we can best support you to achieve improved patient outcomes together